Suregrip is a pre-aggregated anti-slip floor paint designed to deliver dependable slip resistance in areas where safety matters most. It is intended for internal and external use and provides a durable textured finish for heavy-wear walking surfaces.
It is ideal for ramps, walkways, steps, stairwells, car pits and areas around machinery. This product sits within the specialist anti-slip paint range and the wider floor paints range.
Key features
- Pre-aggregated anti-slip floor paint
- Suitable for interior and exterior use
- Available here in 2.5L and 5L sizes
- Available in 9 colours
- Suitable surfaces include wood, metal, concrete and GRP
- Finish: aggregated anti-slip
- Application by roller or brush
- Estimated coverage: 6 to 10m2 per litre
Use guidance
Apply in the recommended system for the substrate and allow the product to dry fully between coats. For best durability and anti-slip performance, use the correct primer and apply two full coats of Suregrip.
Downloads
Preparation and application notes
Suregrip can be used on concrete, wood and metal when the surface is properly prepared, clean, dry and free from oil, grease, dust and loose material.
- Concrete may need shot blasting or acid etching to remove dust and laitance
- Concrete primer: one coat of Coo-Var Floor Paint thinned 10% with white spirit
- Metal should be cleaned and primed with a suitable zinc phosphate primer
- Wood should be cleaned and primed with Coo-Var Floor Paint
- Previously painted surfaces should be tested first and cleaned, abraded and stabilised before coating
Preparation and application notes
Suregrip can be used on concrete, wood and metal when the surface is properly prepared, clean, dry and free from oil, grease, dust and loose material.
- Concrete may need shot blasting or acid etching to remove dust and laitance
- Concrete primer: one coat of Coo-Var Floor Paint thinned 10% with white spirit
- Metal should be cleaned and primed with a suitable zinc phosphate primer
- Wood should be cleaned and primed with Coo-Var Floor Paint
- Previously painted surfaces should be tested first and cleaned, abraded and stabilised before coating
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.